Tractor Talk Discussion Board |
Re: Differential lock
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tom on November 04, 2003 at 18:57:05 from (166.102.84.237):
In Reply to: Differential lock posted by Jim in Alabama on November 04, 2003 at 17:16:12:
The differential lock has three positions. When the lever is in the differential lock is off. When it is pulled out all-the-way (and not turned 90 degrees) the differential lock is on continually. When you have the differential lock pulled out just far enough to turn the lever 90 degrees; then, the differential lock will only engage if the front wheels are turned less than 10 degrees right or left. This allows you to steer the tractor while having the differential lock engaged. Sometimes to engage the differential lock, it is necessary to pull the lever all-the-way out first, then bring it back in and turn it. The differential lock on Belarus tractors is something similar to a clutch that is hydraulically engaged. The hydraulic unit is situated on top of the power steering unitin the front of the tractor. The lever you pull is connected to a cable which turns a little wheel which controls the valve responsible for engaging the differential lock. It may be possible that the cable is out of adjustment, or the discs in the actual locking mechanism (located in the same housing as the left brake) have worn out. The best way to test if the diff. lock is working at all would be to pull the lever out all tha way (holding it in this position) and try and see if you could steer the tractor.
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|