|
Tractor Talk Discussion Board |
Re: Re: Why do JD engines go putt-putt?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Paul in Mich on February 14, 2004 at 07:34:38 from (68.188.227.110):
In Reply to: Re: Why do JD engines go putt-putt? posted by Roin 1456 on February 13, 2004 at 20:53:12:
Roin, I have to disagree with you in a sense. actually if you listen to a John Deere they dont go putt-putt. That would be one piston firing at point zero and the other firing at 180. A complete revolution is of course 360 degrees. If you look at the mag or distributor, I think you will see one contact at zero and one contact at 270. The mag or distributor is geared to rotate half the speed as the crank which means that one revolution of the crank is compression stroke, the other is power stroke, therefore the two cylinders are both firing on the same revolution and firing depending how you look at it 0 and 270 or 90 and 270. This makes the sound more like Putt-tut....Putt-tut....Putt-tut.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
