|
Tractor Talk Discussion Board |
Re: Re: Re: Re: Alternator
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John's diagram/pictures on February 18, 2004 at 23:47:46 from (69.26.17.240):
In Reply to: Re: Re: Re: Alternator posted by John----LONG WITH PICTURE on February 18, 2004 at 23:01:37:
just to add a comment to John's excellent wiring diagram and picture of the Delco 10 SI with #2 sense wire installed. It about scares me to death every time I see uninsulated quick connector terminals on the regulator of a Delco alternator. These terminals are a tiny fraction of an inch from shorting to the alternator case. If the wires are bumped/pulled,and the #2 sense wire shorts it will burn up the BAT wire in the harness. If the #1 exciter/field terminal shorts it will burn out the diode or burn up the field wire if no diode is used. PLEASE PLEASE spend the $1.50 for a replacement Delco alternator plug with pig tail wires attached and prevent burned wiring and possibly a tractor destroying fire.
Follow Ups:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
