Re: Re: Re: Head Gasket Sealer

Posted by LesWV on March 04, 2004 at 09:22:16 from (24.154.163.52):

In Reply to: Re: Re: Head Gasket Sealer posted by Old Joe on March 04, 2004 at 02:47:42:

CH
Using Copper coat is a good idea on older engines. For over time the block and head warps somewhat due to heat. Which is normal and copper coating fills these gaps.

If you are using Permatex Copper Spray-A-Gasket. Do not forget to shake the stuff up. also shake the can often when appling. For if it is not mixxed well you will end up with more glue than copper on your parts.

Tip with using Permatex copper coating. If it fisheyes when you apply it. Your parts are to cold.

Follow Ups:

• Re: Re: Re: Re: Head Gasket Sealer Thanks Les 12:48:23 03/05/04 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Head Gasket Sealer Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]