Tractor Talk Discussion Board |
Re: Re: belly mowers
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Evan Bellville on March 25, 2004 at 16:45:05 from (67.132.241.143):
In Reply to: Re: belly mowers posted by Pete - IN on May 07, 2003 at 10:58:11:
I agree. My vote is for a finish mower over a belly mower. I have a JD 790 with a belly mower. Although decent mowing, it is a real pain to dismount, disconnect the front PTO and reconnect, replace the belt, blades and about every other common function. The required attachment to the 3 point hitch also greatly restricts the lifting capacity and height for other attachments such as box blade, auger and others. The finish mower has a couple of drawbacks. First is the swing of the unit out of line with the wheel tracks in turns, and if you are not careful, you will clip trees and buildings. Second, it is slightly more tricky to get close to obstacles as it is behind you and not directly under you. All things considered, buying a tractor with a belly mower, the additional cost of a front PTO, and the restricted use for other attachments just doesn't make sense. You will end up with one very expensive lawnmower. Better to purchase finish type mower and use the tractor as a real utility machine.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|