Tractor Talk Discussion Board |
Re: Diesel exhaust odor
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Kevin (FL) on June 10, 2004 at 20:36:20 from (12.77.199.245):
In Reply to: Diesel exhaust odor posted by IanC on June 10, 2004 at 16:54:03:
We have a Ford 172 diesel, an AC D17 diesel, a 6 cylinder Perkins, a 6.5L TD in a Suburban and a Ford Powerstroke and each one has a slightly different "aroma" when idling. The old AC probably has the lowest compression ratio so it has the richest exhaust. The Ford 172 probably comes in 2nd. The two vehicles are pretty close, but the Power Stroke has a richer smell, especially when cold. But as some of the other posts mentioned, several factors affect diesel combustion and the exhaust smell--fuel quality and type, compression ratio, injector timing, injector condition--especially the atomizer tips, fuel pump timing, piston blow-by, valve seating conditions, air inlet filter condition and type of oil. I've noticed that two identical tractors and condition--one using Rotella and the other, say Delo, will smell differently. Since a little oil gets burned with diesels, that enters into the mix too. This is more noticeable right after changing the oil--it becomes less and less noticeable after the engines get a few hours on the oil change.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|