Re: how to weld draw bar

Posted by KX on July 15, 2004 at 12:39:15 from (38.115.0.254):

In Reply to: how to weld draw bar posted by dick on July 15, 2004 at 07:44:37:

If it is worn from contact/rub, I would fill in the worn area with another piece of steel fitted as best i could. Then I would weld a contact pad so it couldn't wear so easily in that same place. You may also want to add to the width of it in that area with 3/4 sucker rod welded to both sides. You don't want to try to just "fill" the area with welding rod, weld more to it to make it stronger and prevent future wear. I always try to fix something like by making it stronger than it was before.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: how to weld draw bar Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]