Tractor Talk Discussion Board |
Re: W6 - How much oil goes in rear ?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by txblu on July 23, 2004 at 05:47:57 from (199.46.199.231):
In Reply to: W6 - How much oil goes in rear ? posted by tara on July 22, 2004 at 15:02:15:
I'm assuming you're TaraA. Did you get your Ford running? Must have as haven't heard from you lately. Most gear drives place the oil level just below the shaft seal. Most gearboxes have a pipe plug at the desired FULL level. Some gearboxes have a filler on top and others (like your differential in your P/u, assuming that any self respecting farm girl has one)use the full plug as the filler opening. You might want to take a piece of wire or something and test the oil level. If you are just acquiring this machine and the level is low, you might want to just drain all the fluid and replace with new. If the tractor has been sitting out or in a cold climate, condensation and rain ingestion could be doing a number on your metal. Drain plugs are easy to find. Just crawl under the tractor and look for a pipe plug(s) on the bottom of the housing. May be as many as 4 or as few as 1; usually 2 or 3. Some hyd sections have a dip stick which makes it easy. For sure if you have a dip stick, you have a top fill. The fill cap should be about 2 to 3 inches in dia somewhere on top of the housing. Book will tell you, but preferred fluid of the day was straight mineral oil. We use GL1 90w today. Good Luck, Mark
Follow Ups:
Home
| Forums
Today's Featured Article -
History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
Latest Ad:
1945 Farmall wide body gas with pto and front plow. Runs good but needs new points.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|