Tractor Talk Discussion Board |
Re: Liquid Ballast vs. Iron Weights
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Benjb in NE on July 29, 2004 at 09:10:18 from (68.118.144.78):
In Reply to: Liquid Ballast vs. Iron Weights posted by 720Deere on July 29, 2004 at 06:26:53:
The answer to your question involves Physics, moments of inertia, and Calculus, integration. The basic equation is I=MR^2. By knowing the different radii and the masses involed you can set up an intergal to evaluate between the two radii. If you do a general equation for a hollow cylinder (liquid ballast) and a solid cyclinder (wheel weight) you get I=.5M(R_1^2+R_2^2) and I=MR^2, respectively. By comparing the two I's you can see which one would have a greater inertia (resistance in a change of motion). To illistrate, suppose you have a wheel with a 20 in minor radius and a 25 in major radius. You have the choice of putting a 1000# (treated as mass) wieght, with a 10in radius, or 1000# of fluid. The inertial for the weight would be .5*1000*10^2 or 50000 h's (arbitrary unit). The inertia for the fluid would be .5*1000*(20^2+25^2) or 512500 h's . The fluid in this example definitely has more inertia (about 10 times more) and would require more horse power. (to find the exact horse power difference you would need to get to standard units and plug into a few mor equations). Another point to consider is that the fluid doesnt fill the entire tire. My Allis B manual said that originally they came filled with only 75% fluid. that means that the weight is not balance with respect to the axis of rotation. Which is easy to turn and keep turning, a balance flywheel or one with a large chunk taken out. In both regards it appears that the solid wheel weights require less HP in order to move the machine forward P.S. The closer the mass is to the axis of rotation, the less rotational inertial it has.
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|