Tractor Talk Discussion Board |
Re: CRANKCASE BLOWBY
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by BushogPapa on August 20, 2004 at 20:38:44 from (152.163.252.193):
In Reply to: CRANKCASE BLOWBY posted by NEED HELP.......... on August 20, 2004 at 18:39:20:
That is really a "suggestive" subject...!! It depends...some tractors will "Breath" quite a bit, until they are really good and hot--as they are eveporating moisture from the crankcase, etc.. If it is still blowing a lot of vapors after a good long hot run, suspect ring-seal, or valve-guides.. Using a "Leak-down" type compression tester will give you a good idea of each cylinder"s condition. Using this method, you can actually hear any leaks from the intake valve, exhaust valve, breather, etc.. What you use is regulated compressed air put in the cylinder at reduced pressure, while the piston is at TDCC.. With an air-flow measurement, you can see how much is leaking out of the cylinder.. Less than 10%leak-down is pretty good..1 or 2% is what you would want in a competition engine BUT..if it still runs good...why fix it if it ain"t broke..??? Ron.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|