Tractor Talk Discussion Board |
Re: Your Opinion?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by G-MAN on August 26, 2004 at 07:46:59 from (67.52.48.10):
In Reply to: Re: Your Opinion? posted by TimFL on August 26, 2004 at 07:37:07:
Those that think MFWD is only so you can work in muddy conditions are clueless, at least when it comes to field work. I won't even get into the obvious advantages of an MFWD tractor when feeding cows in two feet of snow and mud - that's not a case of wanting to go out and work, it's a case of HAVING to go out and work. When it comes to normal field work with an MFWD tractor, you might have a tractor that is capable of working in the mud, but you'll have trouble finding a disk, planter or field cultivator that is. Some idiots try, and you can find pictures of buried tractors all over on the internet. But those guys would get ANYTHING stuck, so that's a moot point. MFWD is now required because of the high horsepower levels. Around 220 PTO horsepower is the practical limit of what you can effectively put to the ground with only 2wd, depending on conditions, what you're pulling and the tires. All the manufacturers are now building row-crops in the 250 PTO hp range, with the biggest that I know of being the Deere 8520 at 255 PTO horsepower - they usually push 285 on the dyno though. MFWD is also a safety factor when pulling big loads down the road, as it enables four-wheel braking, at least on the later models that automatically turn it on when both brake pedals are depressed together. If you can design and build a 300 horsepower 2wd tractor that will compete wheel-to-wheel with an MFWD for less money, get on it, because you'll be a rich man.
Follow Ups:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|