Tractor Talk Discussion Board |
M - losing oil rapidly, but where?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Farmall J on September 03, 2004 at 06:36:45 from (199.234.183.2):
I recently bought a used head and had the head boiled and cleaned thoroughly. Two valves were replaced and all moved freely before replacing. My problem is while the tractor runs great, when I went to change the oil after running for 2 hours, there was barely 3 quarts to drain out of the pan after filling it up before running. There is oil bubbling out of the spark plugs. I am not sure about oil in the water due to the water not being completely clean prior to use. Could I have placed the head gasket on incorrectly? Could I have a cracked block, and if so, how could I detect it? The engine didn"t smoke, so I am not sure if oil is escaping through the exhaust manifold. The cylinder walls were not scored when I replaced the head, but there are now metal filings in what oil I did drain out of it. Any ideas? thanks in advance
Follow Ups:
Home
| Forums
Today's Featured Article -
Oliver 550 Purchaser Checklist - by Greg Sheppard. Pound for pound the 550 is better than anything I've seen. It has great power for its size and can really hunker down and lug. Classified as a 3-bottom plow depending on soil conditions. I personally don't think it can be beat for a utility tractor in the 40 HP range. They are extremely thrifty on fuel, at least my DSL is. Most drive train parts are fairly easy to get. Sheet metal is probably the hardest thing to
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|