Tractor Talk Discussion Board |
Re: Tire Size = Tractor Speed
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jon C- Florida on September 28, 2004 at 16:52:55 from (66.209.40.192):
In Reply to: Tire Size = Tractor Speed posted by Lance on September 28, 2004 at 14:41:51:
Lance - if the diameter of the wheel is reduced by 4", the circumference is reduced by 12.56 inches or roughly one foot, if I did my math right. So for every revolution of the smaller diameter tire it would travel one foot less in distance than the larger tire. Assuming the larger tire is maybe about 4.5 feet in diameter, the circumference would be 4.5 x pi (3.1415) or about 14 feet. So, one revolution of the smaller tire is about 13 feet, or roughly 92 percent of the larger. The speed (distance/time) of the smaller tire would also be somewhere around 8 percent less than the larger tire, more or less. (Adjust the math for whatever the diameter of the larger tire is.) The larger the bigger tire is in diameter, the less the percentage change is. In my opinion, it could be significant, and you may be on the right track.
Follow Ups:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|