Tractor Talk Discussion Board |
Re: Wide front /trike front
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by 1945 A on October 05, 2004 at 05:56:23 from (199.245.220.253):
In Reply to: Wide front /trike front posted by old on October 04, 2004 at 20:22:54:
Not trying to be in denial, but the link shown here, shows a "rollover test" being performed, comparing an 8N Ford and a JD "A"--- if you"ll look, it appears to be an apples and oranges comparison, since the Ford is being tested in neutral, and the JD is in 6th gear----there"s no indication of actual speed of the 2, but, I"m assuming the JD is operating under full power. According to my operator"s manual, that would put the old Deere running at about 12 mph + downhill, making a turn---- hopefully not a "real world" situation! That the tractor turned over should hardly come as a surprise... As has been stated before, it"s as much personal preference as anything else. While the wide front would certainly seem to be more stable, the narrow or tricycle front shouldn"t scare you, if you"re careful, pay attention to what you"re doing, speed, etc---- common sense that should be used any time you"re operating machinery.... Yeah, I have an old "A", but I"m not touting how wonderful it is, just saying that I"ve mowed, pulled a disk, etc, but everything I decide to do, I make oprerating the tractoir the ONLY thing I"m thinking about....
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|