Re: Filling tires with fluid

Posted by Indydirtfarmer on November 01, 2004 at 04:14:08 from (66.83.236.250):

In Reply to: Filling tires with fluid posted by J.D. Jim A on October 31, 2004 at 18:20:37:

Aside from "preidential opinions", fluid in tractor tires is one of the hottest "issues" on this site. Some believe in it, others don't...The ones that DO use it have many idea's about WHAT fluid you should use.

You asked a specific question, so I'm assuming you have already made up your mind to put fluid in yours.

I use windshield washer solution in mine too. In a perfect world, I'd probably opt for cast weights. But we all know it isn't perfect. They tend to loosen up, and rattle around. They're expensive to buy now that steel prices shot through the roof.

Fluid is relatively cheap. It is effective. I have found that I get enough weight from the winshield solvent to reach the desired weight. CaCl will make for MORE weight, but in most cases, you end up with more than you really need anyway. (In the case of loader tractors, you almost can't have too much weight)

I buy my Windshield solution in 55 gallon drums, from NAPA. I get it for around $.52 a gallon that way. I bought a fitting from NAPA that allows a garden hose connection to the tractor tube. It has a built in air bleed valve. They sell a MUCH more expensive valve that allows you to remove and re-install the valve core without loosing a drop of fluid. That is particularly nice if you're using CaCl. (It keeps it from spilling onto your rims when starting and stopping the "fill"). I bought a "TEEL" stainless steel chemical pump from W.W.Grainger. It allows me to pump in and out of the tire, at a rate that will fill an 18.4 X 34 tire in about 30 minutes. The valve, 2 pieces of garden hose, the pump, and a stainless steel air gauge set me back about $125. That will pay for itself in a couple tire repairs, over the cost of having it done by a tire shop. The pump means I can do all of this without the need for elevating my barrels of fluid. That allows me to fill or emty a tire almost anywhere. (I've had a number of flats out in the field. All I need is a generator to power the pump)

I've seen a number of "air powered pumps" in tire service shops. They will suck every last drop of fluid out of a tube when doing a repair. My system leaves a gallon or so, but it is easily drained once the tube is removed from the tire.

Hope this helps. John

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]