Re: What makes a Bobcat 743b Creep?

Posted by DLM on November 23, 2004 at 20:57:00 from (204.118.157.154):

In Reply to: What makes a Bobcat 743b Creep? posted by Kraig Kutcher on November 23, 2004 at 09:34:02:

The linkage on your bobcat can be adjusted so they don't creep. The rubber bushings in the end of the linkage are probely bad also the cams on the levers on top of the pump have flat spots & the blocks that rub on the cams have flat spots. If you want to repair the cheep way you can turn the cams a 1/2 turn & turn the blocks over & install new bushings make sure the center spring is ok and not binding up Then adj. everything. Don

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]