Tractor Talk Discussion Board |
Re: Chrysler 2.7 V6
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob - MI on December 01, 2004 at 12:31:37 from (66.14.205.20):
In Reply to: Chrysler 2.7 V6 posted by dhermesc on December 01, 2004 at 09:48:28:
Couple of things I would do: Immediately check and see if you are covered on the Chrysler extended warranty for this issue. Public pressure has an impact sooner or later and they may have stepped up to the problem. They may not be too open about it and you will have to pry a bit. Plan on having service done at the Chrysler dealer. They will get a bit more for oil changes but they will have the records if anything goes bad. I have a friend that had his Chevy van serviced religously at the dealer and when the engine blew at 50,000 miles, GM took that into consideration and fixed it for free. That was some years ago but the premise is still solid. Do an internet serch for service and recall bulletins for that car. There is a lot of data out there to be had and actually the amount of service issues on new cars is frightening. 2004 has the distinction of having the highest number of automotive recalls in history. Make friends with the service guys at the dealership. They are just normal folks like the rest of us and they will give you some tips on what they have seen. If you bought this from a dealer and you are spooked think about a trade. Things like this bug me to death and once I get a bad taste for something I can"t get away from it. Best of luck on this. Whatever you do, keep a cool head and be persistant.
Follow Ups:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|