Re: GMC/Chevy

Posted by Allan in NE on December 22, 2004 at 11:59:43 from (148.63.132.164):

In Reply to: GMC/Chevy posted by tlak on December 22, 2004 at 11:30:15:

Hi,

Somebody told you wrong; they were thinking of the pivot pins, not the bowl screws, of which there are three.

The job is not too bad, you'll have to get down under the Turn Signal switch. The three little screws hold the upper bowl in place. They take a torex bit.

You'll need the special tool to unload the wheel/ignition lock plate, however. It's about a 20 minute job.

Allan

Follow Ups:

• Re: GMC/Chevy Allan in NE 12:22:11 12/22/04 (4)
  • Re: GMC/Chevy Tim...OK 12:36:06 12/22/04 (3)
    • Re: GMC/Chevy Allan in NE 12:53:31 12/22/04 (2)
      • Re: GMC/Chevy buickanddeerre 13:55:27 12/22/04 (1)
        • Re: GMC/Chevy Allan in NE 14:14:57 12/22/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]