Tractor Talk Discussion Board |
Re: Down Pressure on a 3 point hitch
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Rod (NH) on January 07, 2005 at 14:08:08 from (64.140.200.138):
In Reply to: Re: Down Pressure on a 3 point hitch posted by Les...fortunate on January 07, 2005 at 12:35:02:
Hi Les, Sounds to me like you have a double acting cylinder(s) but are only using a standard spool valve w/o a float position. Such an arrangement would provide up force with hydraulic pressure applied to both cyl ports simultaneously with the spool in the up position, float (or down) with both ports open to return in the down position or fixed (cyl locked in position) with the spool in neutral. If that is true, it should be relatively simple to replace your control valve with a spool that also has a fourth position that provides the float. That way the down position would be used to actually power down (down pressure), the up positon of the spool would power the cyl up, the neutral position would lock the cyl in position and the float position would permit the whole thing to float over varying gound. To me, this is the only way to fly and should be an easy changeout unless you are using some kind of OEM built-in control valve thingy. I don't know what your pump output is but normally powering both ports of a double acting cylinder at the same time results in a faster cylinder extension but with a significantly lower force than what the system is capable of giving. Re-plumbing through a four position spool (incl float) would slow down the action but also provide a greater lift force at the same time, in addition to providing down pressure. Rod
Follow Ups:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|