Tractor Talk Discussion Board |
Re: diesel timing light
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by NC Wayne on January 19, 2005 at 21:07:39 from (205.188.117.7):
In Reply to: diesel timing light posted by maddog on January 19, 2005 at 17:19:27:
You don't say what kind of engine you have or why your needing to "time" it. Both things can make a difference as to what kind of tool you actually need, if you even need a tool. Personally I've never seen an actual timing light for a diesel. In fact I've never seen a diesel with external timing marks that you could use one on anyway. Maybe there there on some of the new stuff, but nothing I've ever seen. I know SPX Kentmoore makes what they call a Tach and Time that reads the vibration from the fuel pulse in the #1 injector line and allows you to use it for timing in place of the spark impulse in a gas engine. They list them on Ebay one in a while for pretty good prices. I know some pumps have elongated holes allowing a little adjustment in them but if you properly timed the engine before pulling the pump and marked it then you should have the right timing when you go back. If you had the pump rebuilt then the shop should have timed it properly before they let you have it back. In that case watch the valves and make sure you are bring #1 back to TDC on the compression stroke. All of the pumps I've ever seen can only be put back in either right or 180 degrees out. As long as the pump is timed right you should be able to time the engine this way and only need to move it a few degrees either way for it to line up with the pump shaft. From there, even if the pump wasn't actually marked you can usually just look at the paint marks and get it back in the right spot. Granted there are many different punmps and engine out there and the couple things I've said won't work on all of them but ensuring the pump is timed and timing it back in by watching the valves is pretty basic and should work on alot of them. Good luck with whatever your actually needing to do, I hope this helped a little.
Follow Ups:
Home
| Forums
Today's Featured Article -
Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|