Tractor Talk Discussion Board |
Re: Sears garden tractor
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by 83Jim on February 16, 2005 at 05:17:11 from (65.84.186.58):
In Reply to: Re: Sears garden tractor posted by bigmonts on February 15, 2005 at 09:01:45:
Not sure of the years they were built. Mine was bought new by a friend's father in 1973. I have had problems with the electronic ignition system on mine. This must have been "state of the art" in 1973 but to replace the ignition (spark)module is about $100 and the stator (alternator) which fits under the flywheel is about $200. The rectifier (regulator) for the alternator is another $100. A running unit in good condition would be worth about $400-$500 just for the items listed above. Alternatively, you could be looking at that much or maybe more (with labor) to get a unit running if there is a problem with the ignition system. The overhead valve engine designs are prone to leak oil from the seals around the valve push rod tubes. However, this is a fairly simple fix but does require removing the head and replacing inexpensive O-rings on each end of the tubes. These units weigh about #250. They have lots of power and good heavy transmissions. (Three speeds forward plus reverse. (Hi-Lo range gives 6 speeds and 2 reverse).
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|