Tractor Talk Discussion Board |
Re: seeding bermuda grass.
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by john in la on March 12, 2005 at 07:49:40 from (65.6.124.33):
In Reply to: seeding bermuda grass. posted by cb on March 12, 2005 at 06:03:16:
Well if you want to seed you must want common Bermuda because all hybrid varieties need to be sod. I do not know where you live but here in the deep south common Bermuda is used a lot. It is considered a high traffic grass. That is why they use it on ball fields a lot. Common Bermuda grows best with a soil PH of 5.8 to 7.2 and requires about 3-7 lbs of N per 1000 sq ft per year. It can be left to grow long but if you cut it short it is best cut with a reel mower. Other mowers work but a reel mower allows for the shorter more manicured look. Seeding on a slope may be a problem. A well prepared seed bed is best for planting but then as you said erosion comes in to play. You may try covering with a thin layer of hay to prevent erosion till it can get started. You could also try to over seed with a little extra seed to allow for loss. Normal seed rate on prepared bed is 1 lb of hulled seed per 1000 sq ft or 40 to 45 lbs per acre. Bermuda needs full sun and does not do well in the shade. Wait till the soil has warmed well before seeding. About 70 deg 2" down should be good.
Follow Ups:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|