I'm baffled

Posted by tire_guy on April 03, 2005 at 10:29:23 from (216.248.117.154):

In wanting to be a nice guy I offered to take the tank from my father-in-law's Ferguson, clean out the rust and treat it. I read many of these posts about the process, bought the Works and started to clean it. It was then I found out that this tank has baffles in it which isn't the worst thing, just harder to get the coating over the whole thing. My problem is that one of the baffles is loose and floating around inside. As I see it I have two options, hold it down while I coat the inside or remove it. What advice does the experience and knowledge from this group have to give me?

Follow Ups:

• Re: I'm baffled farmallman 12:54:46 04/04/05 (0)
• Re: I'm baffled marlowe 16:51:47 04/03/05 (0)
• Re: I'm baffled Nebraska Cowman 11:07:14 04/03/05 (0)
• Re: I'm baffled Ray 11:03:55 04/03/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]