Tractor Talk Discussion Board |
Re: Chisel Frame
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John A. on April 23, 2005 at 18:04:37 from (65.161.170.163):
In Reply to: Chisel Frame posted by Allan in NE on April 23, 2005 at 16:01:39:
Allann There is No doubt you new girl will pull 9 shanks , just a Screaming and a Flying!. I am not sure about your termonoligy of "open field chiesel" A standard chiesel plow like the 3pt-13 shank Graham-Hoame I have is 3 - 4x4 cross beams with shanks in a 4-4-5 configuration. A single 5x7 tool bar is a he!! of a tool bar. If you are planning on only one foot apart it would probablly be all right though I would crenge in hard packed ground. If you are planning on useing it as a a 9 row ripper on the middles on cirles, I am afraid you don't have enough tool bar to do that! We had a 7 row Orthman middle ripper, It had a 10x10, or 8x8 tool bar I don't remember now. pulling it with a 4840 w/ straddle row duals. 14 to 16 in deep was all we could get out of it and keep any kind of speed. At that point you could watch the tool bar rainbow back in hard pulls. You could forget about running it without the duals. I am sure Hamby or Orthman, or someone makes a mount that will put that shank on a 5x7! Hope this helps. Later, John A.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|