IH B275 diesel

Posted by Munkle on May 03, 2005 at 16:46:33 from (68.21.46.195):

Hello there,

I have a B275 that will not start. I have replaced the positive cable to the solenoid and negative to the starter. I have ohm'd the positve cable to the starter and I know that it is good. I removed the starter and bench tested it to see if it would turn. When I put power to it, I got roughly 150-200 rpm out of it at first and then within 2-4 seconds later it would die to roughly 50-90 rpm. I used a power source that supplies consist power. (I didn't want to wonder if the battery I was using was going bad).

Is this normal? I am thinking that the starter is shot. What do you all think?

Thank you,

Munkle

Follow Ups:

• Re: IH B275 diesel jdemaris 19:34:52 05/03/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]