Tractor Talk Discussion Board |
Re: OT:chlorinating rural wells?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by MarkB_MI on May 13, 2005 at 03:47:26 from (64.31.11.132):
In Reply to: OT:chlorinating rural wells? posted by IaGuy on May 12, 2005 at 18:35:16:
Before you spend money on an automatic chlorinator, first see if chlorination helps. You can shock your system with Clorox. Here's how, if you have a submersible pump with a pitless adapter. 1. Switch your water softener to bypass, as Clorox at high levels can trash the resin bed. 2. Take the cover off your wellhead. Dump some Clorox in. There are formulas on the web for determining how much, but I'd just dump in half a gallon to start; you can always add more. 3. Take a garden hose and use it to run water down the well. Stop when when you can smell chlorine coming from the hose. 4. Open up the cold water taps in the hose until you can smell chlorine in each, then turn them off. 5. Open up the hot water taps and run them until you can smell chlorine. You might as well turn off your water heater, since you'll flush it out later. 6. Leave the house for a few hours. 7. Run your taps until you no longer smell chlorine, or at least it's mostly gone. There will probably be some residual chlorine for a few days. You can turn your water softener back on once the worst of the smell is gone. If your problem is temporarily fixed, then you might be a candidate for the chlorinator. (I thought I was going to have to do something similar, until I figured out that I just needed to swap out my water heater anode to fix the rotten egg smell in my water. I'll post a message in tool talk on that.)
Follow Ups:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|