|
Tractor Talk Discussion Board |
Re: Iseki 3 cylinder fuel injection
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by doogdoog on May 22, 2005 at 21:38:48 from (66.8.145.42):
In Reply to: Re: Iseki 3 cylinder fuel injection posted by victorvillian on May 22, 2005 at 19:38:09:
Aloha,
I don't know anything about that injector pump but since everything was working fine before the fuel line change, the pump would have to be bled of air like you said. If you cannot find the bleed valve (if it has one) I would use a vacuum pump on the output side of the pump to try and see if it will suck the fuel out and if it doesn't, then give the starter a couple of turns with the vacuum pump still on with vacuum applied. When you said that "I opened the injector lines" , did you open it at the nozzle or at the output of the injector pump?? You could also use an electric fuel pump (before the injector pump)to get things going if you don't have a vacuum pump. I wouldn't turn it too much with the starter or you will have another problem. There could also be another problem caused by foreign debri getting into the injector pump when you changed the fuel line. Mahalo,
doogdoog
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
