Tractor Talk Discussion Board |
Re: oil pressure gauge
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by txgrn on July 03, 2005 at 04:18:31 from (209.151.117.10):
In Reply to: Re: oil pressure gauge posted by Jerry/MT on July 02, 2005 at 20:51:29:
Couple of thoughts. Bought a non-running tractor one time for a non-running price thank goodness. Got it home and got it spinning (not running, just spinning). No oil pressure. Checked for clogs....none. Checked the engine bearings found reason... very bad mains. You could have a clog or you could have a worn out engine. Several places to look Remove the plugs or injectors, whichever. If it has an oil filter remove it. Spin the engine with the starter and oil should run out the filter hole. If so the pump is working. Put it back. Pull the valve cover and spin the engine for awhile to get oil to the valve train...the last thing to get lubed in the oil delivery chain. Got it good. No then engine bearings could be worn out (mains, rod inserts, cam). If you had it you have a clog to your/in your gauge or a bad gauge. Just back up the line and find it. If you get back to the block a piece of baling wire may clear the hole. Leave the port open and spin the engine and see if it will/can pump oil out the hole. Set your air compressor to 30 psig and shoot air into the gauge. Does it measure 30 psig? On the blowby, it is common on engines having wear. The wear doesn't have to be severe and the engine can run for a very long time after it develops blowby. If everything is ok and you aren't burning oil at an unbearable rate don't worry about it. If you had a vent pipe, like 3/4" in dia (Ford and JD have em) you could put a piece of garden hose over it and route it to your intake manifold with a hose barb and run it back thru the engine. That's what today's PCV systems do on auto's. HTH Mark
Follow Ups:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|