Tractor Talk Discussion Board |
Re: 92 GMC Fails Emmissions
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by thejdman01 on July 06, 2005 at 17:13:00 from (152.163.101.7):
In Reply to: 92 GMC Fails Emmissions posted by Farmer Paul in Ontario on July 06, 2005 at 05:57:01:
unfortunately i have had the very painful experience of emissions and tryign to get them to pass. one huge thing is the air cleaner. you want all the fresh air you can get to burn all that fuel your injecting. we have gone to the extent of removing the air cleaner for the test. no rules against that. also 110 octane fuel helps the motor doesnt have enough squeeze to burn it wont giv eyou carbon emissions. another thing thatyou must check is your pcv valve. put some straight 40 weight oil in your motor so you wont be burning oil. make sure your engine is hot. also if your truck is rather quiet i have removed exhaust manifold gaskets as a last resort if it leaks around the headers/exhaust manifold w/o being noticed by the inspector and doesnt get to the wand at the edge of the exhaust pipe that helps as well let me know if that sdoesnt work there are a few more tricks
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|