Tractor Talk Discussion Board |
Re: 3020 Carb Adjustment
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by msb on July 13, 2005 at 19:26:02 from (12.208.37.116):
In Reply to: 3020 Carb Adjustment posted by Jd Family on July 13, 2005 at 09:40:46:
The slotted screw is the idle mixture adjustemnt and should be adjusted at 600 engine RPM.Screw it in slowly until the engine starts to lose speed and the screw out until the engine starts to run too rich(rough) then split the difference.The screw on the bottom is the load speed jet adjustment.With the engine running at 2400 RPM, slowly turn the screw in until the engine begins to lose RPM.Then slowly turn the screw out ontil the engine starts to run too rich.Then split the difference.Since the two jets sometimes interact ,repeat the process and fine tune the adjustments.Be sure the engine is properly timed before making these adjustments.
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|