Re: Cast iron...

Posted by Duner Wi on September 22, 2005 at 18:36:58 from (63.50.8.139):

In Reply to: Cast iron... posted by Stan(PA) on September 22, 2005 at 08:43:08:

I have been using a self etching primer from BASF # Zip 834 for many years and like it lots. I keep some in one gun and when I get something clean I spray a couple of thin coats. As long as I keep it indoors and dry I can let it set for years with out rust coming back , When time to paint I give it another coat and then paint shortly after. Epoxy primer might do the same for you but I don"t like mixing small quanities of primer with a limited shelf life after mixing. I have put epoxy (Nason) over Zip 834 but it was only 3-4 years ago so don"t really know how it is for the long term. I would expect it to last tho. I would not put rust converter on anything I had a lot of labor in. I have used it when in a bind and it did work for for a few years. Good Luck!

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]