Tractor Talk Discussion Board |
We're cool!
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by 720Deere on October 10, 2005 at 13:55:22 from (63.138.125.15):
In Reply to: 720Deere posted by New-Gen on October 10, 2005 at 05:47:17:
No need for apologies! I didn't disagree with, I was just busting your nads there. I'm a big boy, if I don't like what's said I won't participate. I can take it as well as I can dish it out. That attitude or line of thinking that we are talking about is dangerous. This subject has come up many times in the past 6 months and it will always be debated. We haul 2 tractors at a time on a 28' rollback and have always used 4 chains and binders per tractor. They sometimes weight more than 10,000 lbs, but that's not the point here. Even if they were Cubs I would do the same. We have less than $500 invested in our Grade 70 3/8" chains and 1/2" binders. The binders are Harbor Freight specials, but they are rated at 9200 lbs and they will never see half of that. For that price it is hardly worth taking the chance and no more often than they get used (15 times a year) they will last a long time. Yes the Federal Regs say you are required to use a minimum of 2 securements on anything under 10000 lbs, but it also says that whatever you use must be capable of stopping movement in ALL directions. It is not possible to do that with 2 chains and 2 binders let alone 2 chains and 1 binder! There is also a 60% holdback requirement on the rear chains. If you have a 9500 lb tractor with 1 chain and binder each front and rear(the law says 2 right?) you do not meet the 60% holdback requirement. 60% of 9500 is 5700 lbs and 3/8" grade 70 chain is only rated 5400 lbs. Just because we do something and get away with it doesn't mean it is safe or right. It will catch up with you eventually.
Follow Ups:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|