Tractor Talk Discussion Board |
Re: Firewood question
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Dan Hill on December 15, 2005 at 03:36:22 from (64.12.117.7):
In Reply to: Re: Firewood question posted by Ken Crisman on December 11, 2005 at 18:02:18:
I have bought hard wood edgings from a 4x4x4 pipe frame.This is 1/2 cord. Stacked in it filled an 8 foot pickup bed.Sawed to stove length and thrown back in loose it rounded up.You will have one hell of a time stacking 1 and a halfcord of wood into a pick up bed that contains 60 cubic feet of space.A standard cord will shrink to 100 cu. feet when sawed to stove length.Not to mention the weight of 6000 pounds for a cord and half.This will make your 1/2 ton truck ride pretty low.A ton and a half truck would be badly over loaded with a cord and a half on board.
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|