Tractor Talk Discussion Board |
Re: 686 IH questions
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Jonfarmer on December 25, 2005 at 08:03:37 from (64.91.162.239):
In Reply to: 686 IH questions posted by M Nut on December 25, 2005 at 07:12:09:
Hello and Merry Christmas!. Sounds like you got yourself a dupont restoration, not a throughly gone through machine. Something like the steering problem should have been fixed because thats obviously not right. I'd say one of the valves has a leak and it's leaking oil back into the syestem instead of holding it when the steering wheel is kept straight. The whine could be it is the hydrolic pump and it's alittle low on oil, although thats usually a louder whine, it will make a quieter whine when it's cold out before the tractor gets warmed up when it's cold out, then the whine goes away. I've seen alot of tractors smoke alittle out the crankcase breather, so that wouldn't concern me as much as how well the engine cold starts. Local dealer would dyno test it for you for I think around $40, atleast thats what my local Case IH dealer charges. For the T/A, i've always heard to test that by trying both high and low in probably 2nd gear, and mash on the brakes, if it starts to instantly kill the engine, then its good if not, then it's not so good, and if it won't kill the engine at all, then it's bad. I think $10,000 is too high for anything less than about perfect to be honest with you. Your only looking at a 60-70hp tractor, and the 86 series were kinda big and I don't have a clue what it is you want to do, but perhaps you'd like a 684 or a 784 instead? as those were real nice utility tractors and definatly would fit in places a 686 would not and would give you the same hp.
Replies:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|