Re: Bearing advice needed (kinda long)

Posted by kenojoe on January 13, 2006 at 10:28:18 from (72.49.249.188):

In Reply to: Bearing advice needed (kinda long) posted by MH on January 13, 2006 at 06:39:43:

Most bearings have a shrink fit of a few thousandths. If you are sure that the bearing is good, you can put the bearing in an oven and heat it up to 275-300 degrees and try it that way. Make sure that you have a pipe or something handy that will fit over the shaft that is no bigger that the inner race in case you have to swat it home. Some never-sieze on the shaft may help.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]