Re: Spark Problem on an International 300 Utility

Posted by jeffcat on April 26, 2006 at 12:52:51 from (216.107.36.172):

In Reply to: Spark Problem on an International 300 Utility -195 posted by peletz on April 26, 2006 at 12:20:40:

Your voltage is too low. Wires, switch, dirty points, Etc. There should be around 4 volts on the coil. By the way, did you measure that voltage while cranking? Your meter is not fast enough. Need a scope to measure a coil. Just for giggles try jumping a 12 volt battery with jumpers on her when you start to crank. She just might pop off. Let us know. Jeffcat

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]