Re: Positive ground mix-ups

Posted by souNdguy on May 05, 2006 at 11:34:36 from (12.65.174.235):

In Reply to: Re: Positive ground mix-ups posted by wkw on May 05, 2006 at 06:47:02:

Assuming it is oem.. check your manual and see what the manufacturer equipped it with.

If that fails.. and it is a unit that uses a votlage regulator.. flip the reg over.. and look for small wire wound bias resistors. On an a circuit job.. there will be a bias resistor from the field contact to ground. On a B circuit, ther will be a bias resistor from the armature contact to the field contact.. some B circuit gennies also have a 2nd bias resistor.. etc.

Soundguy

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]