Tractor Talk Discussion Board |
Re: OT - Truck loosing coolant - head gasket probl
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by VinnieNC on June 22, 2006 at 08:28:27 from (12.174.171.101):
In Reply to: OT - Truck loosing coolant - head gasket problem ? posted by CB in central NY on June 22, 2006 at 06:59:22:
I can think of a couple of leak sources. The weep hole in the water pump could be the problem if it is the original waterpump. The leak might also be on one of the freeze plugs on the side of the block, very difficult to see if there is a manifold in the way. If the leak is very slight, I have seen small amounts evaporate away on a hot engine. If you have droplets on the floor, you need to trace them to the point of origination. This may require cleaning the engine down of grease and grime so that you can see a wet spot. Built up grease and grime can soak up a small leak making it hard to find. Also, the leak could be as simple as a heater hose or clamp. You can squeeze them when cool enough and look for seepage. Hope this helps. Good Luck. -Vinnie
Replies:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|