Tractor Talk Discussion Board |
Re: New Clutch Won't Disengage PLEASE HELP!!!!
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Kansas on August 08, 2006 at 03:52:00 from (216.212.40.92):
In Reply to: New Clutch Won't Disengage PLEASE HELP!!!! posted by Clay Colo on August 07, 2006 at 18:10:06:
My first guess is that you've got the plate in backwards, but you sure sound like you know what you're doing so.....my next guess is that the adjustment on the fingers on the clutch are not in correct adjustment---I've only had this happen once....he's my story...a 6 cylinder ford gas engine on a new holland stackwagon....this guy overhauled it, and put in a new clutch and pressure plate...wouldn't relase...when you looked at it thru the inspection hole...the arms on the pressure plate were out (torwards the transmission a longways)...I thought he had put the plate in backwards...pulled the trans. and everything was right....so I'm thinking wrong pressure plate...I go see him...this guy is a top notch mechanic...he tells me...if there are no adjustments (ie...bolts on the pressure plate...to make adjustments ....these would change the relationship as to where the fingers on the clutch are when it is in the released positon...) then you can use an old mechanics trick...and put so spacers between the pressure plate and the flywheel....sounds crazy I thought...I put 2 5/16ths flat washers under each bolt (between the flywheel and the pressure plate) this moved the fingers of the clutch IN...and then it would release...its been that way for 2 or 3 years and works just fine. You don't have to even pull anything apart if you can get to it...loosen the pressure plate bolts...install the flat washers...retighten and see what happens... I don't know anything about your tractor, so I don't know if you can do it like this, but based on my experience, I sure wonder if maybe this is what you've got going on. Good Luck.
Replies:
Home
| Forums
Today's Featured Article -
Show Coverage: Godfrey, Illinois Country Days - by Cindy Ladage. Except for last fourth of July's Old Gold show in Springfield, Illinois, I don't remember when it was so hot. Nevertheless, the heat didn't keep vendors and visitors alike from enjoying the third annual Country Day's Event. Jane Elliott said the event was originally a one man show. "Barry Seiler, owner of Country Town Farm Supply store used to invite people up to the Johne Deere store. He would give hats and a free meal for everyone that brings a tractor." Elliott said while this
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|