Tractor Talk Discussion Board |
Re: Septic
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by paul on August 28, 2006 at 08:49:28 from (66.44.132.109):
In Reply to: Septic posted by JDB on August 28, 2006 at 07:12:03:
Many states have severe rules & laws, you can't even work on your own septic any more; you need to replace anything not working with a mound system. So, depending where you live, you can have real problems. A septic liquifies 99% of the stuff going into it in the tank, and the fluid goes out into the lines and soaks away. However most grease (fat) floats to the top and all dirt, lint, and other non-digestable bits settle to the bottom of the tank. You don't ever, ever want the grease or the dirt to build up to where it flows out to the drain lines. This will plug your drain lines real quick, & your septic is done for. There is no way to clean out the drain lines effectively. Now, some folks can live simple lives & have a big tank & their tank doesn't need pumping in 25 years..... Others do 6 loads of laundry a day, lots of grease & stuff down the kitchen sink, and need the tank pumped every 2 years or they will wreck (fill) it. Your drain lines aren't quite right. I'd sure look into pumping the dirt & grease out of the tank, & check if something simple (or major) is wrong with the tank lines & connections. Perhaps your distribution box is messed up, only feeding one line. Or the like. Spending the money on that now can save you a $10,000 mound system sometimes. Waiting & just hope things keep working can compund a simple problem, & plug up your lines. Then you need to start over. --->Paul
Replies:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|