Tractor Talk Discussion Board |
Re: '95 GMC 6.5TD engine
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by jdemaris on September 07, 2006 at 12:10:57 from (69.67.230.145):
In Reply to: Re: '95 GMC 6.5TD engine posted by Bob on September 07, 2006 at 08:44:25:
The high-nickel blocks show up now and then. Yes, the first 1982s had it. So did many later military-spec. engines. At one time, the blocks were color-coded and stamped to indicate high-nickel content. GM also did it with various high-performance gas engines. I've got a high-nickel block 327 from the late 60s and also had a Z-28 302 that had it. But, besides the alloy used, the casting thickness was reduced in 94. In regard to the block main-bearing webs breaking first and thus causing the crank to break? Could be - in some cases. But, I also know of few 6.2s and 6.5s that broke cranks and still ran - with all main-bearing supports still intact. One 6.2 I looked at broke behind the rear-main - so the flywheel was no longer attached. The guy that started and owns the 6.2-6.5 diesel Website says he believes such failures are due to worn harmonic balancers. I personally, don't believe it. I suspect the cranks are cast (not forged) and simply not durable enough to last forever - and sometimes much less. With bigger diesels, especially in road-tractors and farm tractors, we had many high-hour cranks welded and reground and I never saw one fail (break to pieces) like my 6.2 did. I did have an IH B-275 ag. diesel tractor that had all its main bearing webs crack.
Replies:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|