Tractor Talk Discussion Board |
Re: 6V Positive Ground Alt
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Jon Hagen on September 15, 2006 at 16:37:02 from (69.26.29.242):
In Reply to: 6V Positive Ground Alt posted by Bob Naske on September 15, 2006 at 10:33:44:
I have built quite a few of those one wire conversion alternators,and if not enough rpm to excite the alternator is the problem, then try the smallest alternator pulley to turn it faster. Plan B would be to install a momentary contact button switch that connects battery voltage to the # 1 regulator blade contact for a moment to excite the alternator after starting the engine. use a auto parts store $2 replacement regulator plug to connect to the #1 regulator blade. terminal. Your 1 wire regulator will not need the #2 terminal connected to the battery stud to sense voltage,the 1 wire regulator is wired internally to sense voltage without a sense wire. You should only need to push this button once after starting the tractor,as once excited,the alternator will continue to charge even at low rpm. Plan C,what is the amperage rating of your 1 wire alternator ? A 1 wire alternator with a small 37 amp stator installed will excite at less than half the rpm of a 61 or 72 amp alternator. usuall 37 amps is more than enough for the needs of an antique tractor,so having your alternator shop install a larger 61-or 72 amp stator just makes the alternator much harder to get it charging,as much higher rpm is needed. Maybe all you need to do is have your alternator shop install a 37 amp or smaller stator to fix your problem.
Replies:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|