Tractor Talk Discussion Board |
Clearing brush. I might have OCD.
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Slofr8 on September 29, 2006 at 05:55:17 from (66.231.218.133):
Hi everyone, bought some land 4 years ago and just moved into the house I've been building for about a year and a half. The view out back is a, roughly, 15 acre field and then woods. My land. 57 acres. Used to be potato fields but previous owner let brush take over about 7 acres in the middle. 20 year growth of two to six inch junk wood. If it were any kind of decent trees I could live with it. Soft wood, poplar, whatever, but mister, I'm talking some ugly crap here. I cleared and burned an acre or so with a chain saw but was left with the stumps and it's hard to mow with my 63 year old JD B. I tried a JD 1010 crawler that was for sale. Guy brought it right over for me to try. Turns out the size of the 1010 is ample but it burned a LOT of oil and thru the right track a few times so I passed on the deal. I'm looking at another one that appears to be in a lot better shape. Thing is, when I look at the brush I pushed up with the 1010, I can't see how I would ever burn that pile. I was careful not to get too much dirt in the pile but it still did. Question is, do I pile it up and just keep turning the piles, shaking out the dirt, and burning? Do I just pay someone to haul it off? It would be a heck of a lot off hauling off, let me tell you. Someone suggested burying the piles but that would take some huge holes. Hiring a dozer is an option but after I clear the field I can see where I could use a crawler around here. It would also increase my cylinder count by 4. We are judged by our cylinder count right? Maybe I should just let what's growing there grow there. It's just that I hate the looks of it and besides, about a hundred years ago someone took the time and effort to clear it and might not be to happy about the way it's looking lately. Any way, if you had to deal with this at your place let me know what you did or would do. Thanks, Dan.
Replies:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|