Re: six cyn engine crankshaft

Posted by Easy1 on October 06, 2006 at 05:12:39 from (198.208.159.19):

In Reply to: six cyn engine crankshaft posted by confused crank on October 05, 2006 at 19:33:37:

I work in an engine plant. We make crankshafts, v8's now have done v6 previous. If your crank is really bent more than .010 or so, I believe the engine would be very tight. Our runout spec for the pins to the main is only .001. We have a gage that holds the crank vertically, so it doesn't sag in the middle during inspection. I will say that I have never seen a crank that was assembled into an engine & removed make spec. We never would reuse a crank here. Cranks are surprisingly fragile.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]