Tractor Talk Discussion Board |
Re: tractor overheating
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Jerry/MT on October 06, 2006 at 12:48:39 from (67.72.98.45):
In Reply to: tractor overheating posted by ron laws on October 05, 2006 at 21:37:30:
You said you fill the radiator with water. It should be filled with 50/50 antifreeze/water to protect it from corrosion and the cooling jacket of the engine from rust. Also, the rad should only be filled to the top of the core, leaving the rest of the rad for expansion space of the coolant. Check the pressure cap to make sure it's holding pressure. If you can't find anyone to check it for you, replace it with the correct cap and see if that helps. The fact that you got nasty looking stuff out of the radiator could mean that you have a lot of corrosion in the cooling system. You may also have a leaking head gasket or a crack in the head. Remove the rad cap and start the engine. When the thermostat opens look into the top of the rad and see if you can see a steady stream of bubbles. If you do, then I'd suspect a leaking headgasket or a cracked head. Hope this helps.
Replies:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|