Tractor Talk Discussion Board |
Re: OT:Makes me feel stupid
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Bob on November 12, 2006 at 16:00:24 from (69.178.229.154):
In Reply to: OT:Makes me feel stupid posted by Keith-OR on November 12, 2006 at 13:57:38:
Are you working with a 6.9 liter V-8 diesel? If so they came out in about 1983. If the IP still has the original plastic governor damper ring, the problems she is having are classic symptoms of a failed plastic ring that has gotten brittle, broken up into what looks like coffee grounds, and has plugged the housing pressure regulator/fuel return fitting at the top of the IP. When no fuel can be returned to the tank, the IP ceases injecting fuel, and the engine shuts down. Timing advance is affected, causing smoke before the engine shuts down. You can remove the fuel return hose, then unscrew the complete fitting out of the IP, and look for black plastic chunks in the valve/fitting. If you clean them out, it will run again, for a while. However, continuing to run it without rebuilding the IP will result in governor parts that are supposed to be cushioned by the plastic ring banging around metal-to-metal, once the ring completely breaks up.
Replies:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|