Re: MFWD Farmall M

Posted by Wardner on November 12, 2006 at 16:14:09 from (4.154.247.14):

In Reply to: MFWD Farmall M posted by Youngfarmhand on November 12, 2006 at 14:12:49:

This is an Elwood mounted on a 660 IH. All the hardware with the possible exception of where it mounts to bolster will bolt on the very first M (1939) all the way to the last IH 560-660 mfgd in 1962. That includes SM, SMTA, 400, 450, 560, W-6, SW-6, SWTA, W-400, W-450. It works in all gears including TA

The picture is not lighted very well but you can see where the transfer case is. Power is taken from the top side of 4th-5th slider gear on the mainshaft. An enclosed roller chain lowers the FWD pto about two feet so that it can couple with the front driveshaft. Installation of the Elwood precludes use of the belt pulley. There is no room for both gearboxes.

The axle is govt surplus, probably from a deuce-and-a-half. Everything else was mfgd by Elwood. They made kits for other tractors.

You will find more info by searching on Elwood on the Farmall forum.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]