Tractor Talk Discussion Board |
Re: hard steering to the left...
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Dan-IA on November 25, 2006 at 20:52:07 from (66.43.223.231):
In Reply to: hard steering to the left... posted by roy hill on November 25, 2006 at 08:44:34:
We've established in the past that I know nothing when it comes to green paint so that this with a grain of salt, but... Were this an IH tractor, I'd be looking first for leaking hydraulic oil. If that's not a problem, I'd probably pull the hydraulic hoses to the power-steering cylinder (one at a time), stick it in a bucket and see what kind of flow you get, when the steering wheel is stationary and when you're turning it. I'd probably pull the right one first so you know what to expect, then the left one. If flow seems dramatically less on the left side, then I'd check for a constriction in the hose. Failing that, I'd think about pulling the power-steering actuator behind the steering wheel and giving it a good look over (or have a hydraulic shop check it for you.) Don't forget to refill your hydraulic oil and bleed the air out of the system. Something else I'd check (first) is to see if you hear a pressure-relief valve chattering, especially during a left-turn. If so, that'd be where I'd start. But like I said, I'm an IH guy. My one green tractor (an A) doesn't have any power-steering. So good luck with that.
Replies:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|