Tractor Talk Discussion Board |
Re: O/T: '92 Caravan charge temperature sensor
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Bob on December 19, 2006 at 18:26:33 from (69.178.229.154):
In Reply to: O/T: '92 Caravan charge temperature sensor posted by MeAnthony on December 19, 2006 at 17:47:54:
Some engine 'puter systems look at coolant temp only, or BOTH intake air temp, AND coolant temp. It all depends upon how the van was originally set up. The readings of the temp sensor(s), in effect, tell the puter how much "choke" to use, in this case, to add to the injector pulse duty cycle. WHERE is the sensor.... intake manifold of the donor engine, or in the intake air ducting that has been with the van all along? If the sensor is in the donor engine, and the original engine did NOT have one there, there obviously won't be a pigtail/connector in the van's harness for it, nor will the van's as-original 'puter be looking for it. Of course, also the original engine could have the sensor at a different location. If you have access to a good scan tool, you can probably get a readout on what the 'puter thinks the coolant temperature is, as well as seeing if it is looking at the charge air temperature, and what it is seeing for a temperature there, to see if it makes sense.
Replies:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|