Tractor Talk Discussion Board |
Re: Delco Remy Generator Questions 6v or 12V?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Gene Cockrell on February 11, 2007 at 15:23:43 from (24.32.184.117):
In Reply to: Re: Delco Remy Generator Questions 6v or 12V? posted by Gerald J. on February 10, 2007 at 11:45:10:
Hi Gerald, thanks for the reply. I have a quick question though. You mention something about field core saturation; would this show up as a field coil with a lot larger core for the 12V field coil than for the 6V? Now, the field coils on the old 6V unit show 1.9 ohm resistance across both coils, the questionable unit has new field coils, I didn't want to start cutting covering but they test 6.9 ohms across both coils. Now for the rotor. The 6V armature windings are about half the wire diameter of the questionable (12V?) unit's windings and not the other way around. (Number for the original 6V rotor is 853593- I cannot see a full number for the "12 V" unit). Are you sure that the rotor windings are supposed to be smaller diameter for the 12 V unit? Actually the starter is in a pretty good way. Overhaul with bushings and brushes and a new contactor-bendix was excellent. I have good cables on the tractor, a special thick tractor "hot" cable from the battery to the starter contactor and a thick ground strap. All connections are filed and greased. Bypassing the tractor ground with jumper cables grounding directly to the starter makes no difference. When that starter is hit with 12V it cranks the engine like a BMW. With 6V I can't get the engine to turn through a complete revolution. Fortunately this is enough if the engine is stone cold, it fires right off. As for the battery size, this is an Allis B and it has a pretty small battery box mounted beneath the steering column (original box, too) and there is really just no way to mount a larger battery, anywhere. Changing bulbs is minor, as I have a magneto system, I won't need to fool with a new coil.
Replies:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|